INSPECTING PPE – Manual
“Inspecting P.P.E.” is a publication that meets the relevant demands of users and controllers of Personal Protective Equipment against falls from a height, work positioning, rope access, technical rescue and mountaineering.
This manual is structured in 16 chapters with a comprehensive general introduction and practical instructions for the inspection of all PPE product categories.
Includes a wide range of photographic documentation.
Fulfills the need to have precise instructions for performing a detailed supervision of the products with the aim of ensuring their safety and functionality.
240 pages. Two versions: English and Italian.
Related Products
-
SOLO 2 – Rope clamp
A hyperlight compact ascender with an ergonomic design that makes it very easy to use. Perfect for ascension, verified for traversing, and can also be used in block-and-tackle systems. The lower hole is shaped for optimal positioning of the carabiner while the upper hole fits a safety carabiner to secure the rope. The toothed cam is finished with a special anti-wear treatment and features drain holes to help prevent the build up of mud and grit. The opening mechanism is simple and secure with the ability to lock the device open for easier attachment and a removable pull cord that…
-
JANUS PRO – Pulley
A high strength multifunctional double pulley for block-and-tackle systems and complex operations. Features large wheels, a main attachment point that accommodates three carabiners, and a large becket with a large bottom attachment point and two secondary attachment points on the sides for linking, positioning and attaching progress capture systems. For use with ropes up to 16 mm. Prusik minding, the self-locking knot can be installed on both sides of both wheels. Sealed ball bearings for high efficiency and intensive use at high speed. Efficiency: 97%. Aluminum alloy body and wheels, stainless steel axle.
-
NAIAD – Pulley
A high strength multifunctional pulley for heavy hauling and complex operations. Features a large wheel, a main attachment point that accommodates three carabiners, a large bottom attachment point, and two secondary attachment points on the sides for linking, positioning and attaching progress capture systems. For use with ropes up to 16 mm. Prusik minding, the self-locking knot can be installed on both sides. Self-lubricated bushings are sufficient for light applications at low speed. Efficiency: 90%. Aluminum alloy body and wheel, stainless steel axle.
-
OTTO STANDARD – Descender
$ 31.00One of the lightest figure eights on the market, our Standard Figure Eight offers a smooth rappel with minimal impact on the rope. The secret to rappelling on a figure eight without twisting the rope is to always feed the rope from directly below—never hold the rope off to the side or at an angle.
