TURBOFOOT – Foot ascender
- Proprietary rollers increase climbing efficiency and decrease wear and tear on the device and ropes
- Innovative straps provide a secure and ergonomic fit on boots
- Can be rigged as a locking pulley for light hauling (max load 50 kg, 110 lbs)
- For ropes from 8 to 13 mm
- Available in right and left versions
Ref. | Product name | Weight | Rope diameter min | Rope diameter max | |||
g | oz | mm | in | mm | in | ||
2258 | TURBOFOOT RIGHT | 135 | 4.8 | 8 | 0.31 | 13 | 0.51 |
2259 | TURBOFOOT LEFT | 135 | 4.8 | 8 | 0.31 | 13 | 0.51 |
Related Products
-
OTTO LARGE – Descender
$ 34.00This slightly larger version of our Standard Figure Eight features a larger bottom hole that allows it to be used as a Sticht plate for belaying with single ropes. Due to the thick body, it also has very smooth action on rappels.
-
TETHYS – Pulley
A compact and lightweight pulley with rotating flanges and a large attachment point that accommodates two carabiners. For use with ropes up to 13 mm. Prusik minding, the self-locking knot can be installed on both sides. Self-lubricated bushings are sufficient for light applications at low speed. Efficiency: 80%. Aluminum alloy body and wheel, stainless steel axle.
-
ANDRY – Pulley
$ 18.00A light-duty steel pulley designed to be used for tensioning safety nets. For use with ropes up to 12 mm in diameter. Efficiency: 70%. Carbon steel body and axle, polyamide wheel.
-
INSPECTING PPE – Manual
“Inspecting P.P.E.” is a publication that meets the relevant demands of users and controllers of Personal Protective Equipment against falls from a height, work positioning, rope access, technical rescue and mountaineering. This manual is structured in 16 chapters with a comprehensive general introduction and practical instructions for the inspection of all PPE product categories.